Architectural Shingle Roof Replacement After Hail in Fort Worth, TX

A single-story home in Fort Worth, TX required a full roofing system replacement after a hailstorm compromised the existing 3-tab roof and exterior accessories. The claim was approved by the homeowner’s insurer, Allstate Vehicle and Property Insurance Company, and our team delivered a code-compliant installation that upgraded materials and ventilation for long-term performance in Fort Worth.

Project At-a-Glance

• Roof size: approximately 3,615 sq ft (about 36 squares)
• Shingle system: CertainTeed Landmark AR, Weathered Wood, with SwiftStart, RoofRunner synthetic underlayment, and WinterGuard ice & water protection
• Insurer: Allstate Vehicle and Property Insurance Company
• City: Fort Worth, TX

Challenge: Hail-damaged 3-tab shingle roof with mixed slopes and aging ventilation

The storm left widespread shingle and accessory damage across a roof measuring roughly 36 squares. Portions of the home required steep-slope safety protocols, and several penetrations and vents needed renewal to restore watertightness and airflow. The property owner also wanted a higher-definition look than the original 3-tab roof without sacrificing durability in Fort Worth’s storm-prone climate.

Solution: Complete CertainTeed system with color-matched metals and upgraded airflow

We performed a full tear-off of the hail-damaged 3-tab shingles and installed a coordinated architectural shingle system in Weathered Wood to enhance curb appeal and weather resistance for this Fort Worth home. Synthetic underlayment and targeted ice-and-water protection secured vulnerable areas, while fresh metals and vents delivered a clean, long-lasting finish.

• Remove 3-tab shingles and felt across approximately 36 squares; implement steep-slope staging where required.
• Install CertainTeed RoofRunner synthetic underlayment and WinterGuard at eaves, valleys, and transitions for added leak defense.
• Install CertainTeed Landmark AR shingles (Weathered Wood) with SwiftStart starter for a wind-stable, architectural profile.
• Replace perimeter metals with ACM 2″x2″ woodgrain-brown drip edge for a crisp, color-matched edge.
• Renew penetrations with six base pipe flashings and reseal all terminations using Mule-Hide JTS1.
• Upgrade or replace ventilation: two 14″ Lomanco turbine vents, low-profile DryerJack 477, and aluminum gooseneck exhaust vents; detach and reset existing turtle vents per scope.
• Replace select sheathing with 7/16″ OSB radiant-barrier panels where needed; complete touch-ups for a uniform finish.
• Remove and replace aluminum gutters and downspouts as part of exterior storm restoration to ensure proper drainage alignment.

Result: Stronger weather protection, better ventilation, and elevated curb appeal

The new Landmark AR roofing system delivers resilient, storm-ready protection and a high-definition look that complements the home’s exterior. Upgraded ventilation components help stabilize attic temperatures and move air efficiently, while fresh metals and flashings improve water-shedding at all edges and penetrations. The property owner regained peace of mind knowing their Fort Worth roof is rebuilt with quality materials and professional craftsmanship.

Trust & Proof: Insurance-approved scope and verified measurements

Independent roof measurements document a surface area of about 3,615 sq ft, with ridge and hip lengths captured for accurate planning. The Allstate approval confirmed storm damage across the roof and related accessories, and our material order specified brand-name components from shingles to underlayment and ventilation, ensuring consistency from deck to finish.