Commercial Property Standing Seam Metal Roof Installation in Humble, TX

Firefighter Roofing was called to address major roofing concerns at a commercial property in Humble, TX. The existing roof, a 30-year laminated composition shingle system, was experiencing recurring leaks and structural issues that posed risks to the building. To provide long-term protection and reliability, the decision was made to replace the old roof with a durable standing seam metal system.

Project At-a-Glance

• Roof Size: 28,175 sq. ft.
• Material: 24-gauge standing seam metal panels
• Warranties: 20-year material, 5-year contractor
• Location: Humble, TX

Challenge: Persistent Leaks and Structural Deficiencies Threatening the Property

The original shingle roof had developed widespread water intrusion around roof penetrations. Prior patching with roofing cement offered only temporary relief because an ice and water shield was not installed at vulnerable areas. Water stains were visible on the decking from inside the attic, and sections of the roof showed sagging. Inspection also revealed missing rafters—likely removed during HVAC replacement—causing structural weakness. In addition, static dome vents had been placed too low on the slopes, restricting attic airflow and increasing the risk of premature roof degradation and decreased energy efficiency.

Solution: Durable Standing Seam Metal System for Long-Term Protection

To restore structural integrity and deliver long-lasting performance, Firefighter Roofing recommended and installed a 24-gauge standing seam metal roof system. This upgrade improves weather resistance, durability, and energy efficiency compared to the previous shingle system.

• Removed existing shingles and underlayment down to the decking.
• Inspected and replaced any worn, rotted, or damaged decking.
• Repaired approximately 100 linear feet of missing rafters on the front elevation.
• Installed ice and water shield at valleys, roof-to-wall transitions, and penetrations.
• Installed prefinished standing seam metal panels with all required flashings and trim for warranty compliance.
• Completed the scope on an estimated three-week timeline.

Result: Reliable Performance, Improved Efficiency, and Peace of Mind

The new standing seam metal roof provides the commercial property with exceptional protection from leaks, improved energy efficiency through proper ventilation, and a clean, professional appearance. Structural repairs ensure durability, while manufacturer-backed warranties give ownership confidence for years to come.

Trust & Proof: Quality Work Backed by Warranties

Firefighter Roofing delivered this large-scale commercial installation to industry standards, supported by a 20-year material warranty and a 5-year contractor warranty. The standing seam system enhances property value while ensuring long-term protection and reliability.